Standard servo motors and co-engineered upgrades are both available in the Kollmorgen Goldline Series. The Goldline Series sets the benchmark for performance in high-response, point-to-point motion applications thanks to an interior permanent magnet design. Providing exceptional torque and power density in a low or medium-inertia motor.
Download the Kollmorgen Goldline Systems Technical Paper
Goldline B/M and BH/MH Series
The permanent magnet design offers high torque and power density.
The B and M Series are low- and medium-inertia motors that run on 230 VAC line power.
The BH and MH Series provide similar features and performance at 400/480 VAC.
Download the Kollmorgen Goldline BH and MH Part Builder fact sheet
Goldline B/M Series
Features
- Optimum performance for applications that involve rapid acceleration/deceleration, compliant loads or large inertia mismatches
- B Series: 230 VAC, low inertia
- M Series: 230 VAC, medium inertia
- NEMA and metric mounts
- Resolver or encoder feedback
- UL Recognition
- Built-in thermostat
- Rear shaft extension
- Class H insulation
Options
- 24 VDC, 90 VDC fail-safe brakes
- Brush tachometer
- IP65, IP67 sealing
- Flying leads, bayonet, MS connections
- Inline planetary gea
Goldline Bh/Mh Series
Features
- Optimum performance for applications that involve rapid acceleration/deceleration, compliant loads or large inertia mismatches
- BH Series: 400/480 VAC, low inertia
- M Series: 400/480, medium inertia
- NEMA and metric mounts
- Resolver feedback
- CE Compliant, UL Recognition
- Built-in thermostat
- Rear shaft extension
- Class H insulation
Options
- 24VDC, 90VDC fail-safe brakes
- Brush tachometer
- IP65, IP67 sealing
- 90° rotatable CE connectors, terminal box
- Inline planetary gearheads
- Encoder adapters
Goldline EB and EBH Series
Based on Kollmorgen’s 230 VAC B series and 480 VAC BH series Goldline motors, the Kollmorgen EB and EBH series supply a high-performance explosion-proof servo motor that can be used in areas with flammable vapours or gases.
In tests, these motors were found to be safe from bursting or enabling flames to spread outside the motor casing in the event of an internal explosion.
Features
- UL Recognized or ATEX/IECEx*
- 230 VAC / 480 VAC explosion-proof (Class I, Division 1 & 2, Groups C and D)
- Tested and proven capable of withstanding an internal explosion without bursting or allowing ignition to reach outside the motor frame
- 0.84 to 158 N-m (0.62 to 116.0 lb-ft)
- 75.4 to 195.5 mm (2.97 to 7.70 inches) square frame (NEMA mounts available)
- Rugged resolver feedback
- Speeds up to 7,500 rpm
- Compact (high torque/volume ratio)
- Built-in thermostat
- Class F insulation
* EB motors can be ordered in either ULus (size 1, 4, 6, and 8 frames), cULus (size 2 frames only) or ATEX/IECEx + cETLus configurations. EBH motors can only be ordered with ATEX/IECEx configurations. These configurations, and their corresponding certifications, are mutually exclusive. UL configurations do not have ATEX/ IECEx. ATEX/IECEx+cETLus have the ETL listed mark instead of the UL listed mark, using equivalent UL and CSA standards.
Goldline S Series Submersible Servo Motors
These brushless servo motors are made to withstand severe environments and can function at depths of up to 20,000 feet underwater. Their housings are made of aluminium nickel bronze and stainless steel. Every shaft is made of stainless steel and has an externally serviceable O-ring seal.
Download the Kollmorgen Goldline S Series Data Sheet
Features
- Choice of stainless steel and aluminum nickel bronze housings
- Stainless steel shaft with externally serviceable seal
- NEMA mounts
- Resolver feedback
- SEACON connectors
- Pressure compensated: 5,000 psi (Co-Engineered option for 10,000 psi possible)
- Designed to withstand severe shock and extreme environments